Inspection methods

The following list outlines the standard inspection methods employed by Applied Laser Solutions Ltd. If you require a different method of inspection then please state it when making your quotation request.

  • Hole sizes and definition of feature

    The hole diameters and definition of feature are measured using a computer-controlled Co-ordinate Measuring Machine (CMM) capable of x20 magnification.

  • Hole location and feature position

    Hole and feature positions are measured by using a computer-controlled Co-ordinate Measuring Machine (CMM) capable of x20 magnification.

  • Scribe line position

    Scribe line positions are measured by using a computer-controlled Co-ordinate Measuring Machine (CMM) capable of x20 magnification.

  • Pulse depth

    Pulse depth is measured using a microscope and a scaled graticule.

  • Pulse Spacing

    Pulse spacing is measured using a computer-controlled Co-ordinate Measuring Machine (CMM) capable of x20 magnification.

  • Chips and microcracking

    Inspection for Chipping and micro cracks is carried out using a microscope and high intensity light. A dye penetrant is also used for the inspection of micro cracks